How to Apply FST Coatings Like a Pro: Step-by-Step Guide for Detailers
Share
Looking to get flawless results with FST Ceramic Coating? Whether you're a shop-based detailer or a mobile pro, this guide walks you through the entire process — from prep to application to aftercare. Let’s dive in.
🧼 Step 1: Wash with Chrysoberyl Shampoo
Start by washing the vehicle using FST Chrysoberyl Shampoo. This formula is designed to:
Strip surface debris, dust, and grime.
Leave a clean, residue-free base for claying and coating.
💡 Pro Tip: Use the two-bucket wash method and a high-quality microfiber wash mitt to minimize swirl marks.
🧽 Step 2: Clay Bar the Surface
After the wash, use a clay bar to remove any bonded contaminants from the paint, such as:
Industrial fallout
Tree sap
Embedded Contaminants
This step is essential for creating a smooth, contaminant-free surface that helps the coating bond properly.
🔍 Step 3: Paint Correction (If Needed)
Now’s the time to evaluate your paint. If you see swirls, scratches, or oxidation:
Perform a single-stage or multi-stage correction depending on severity.
Use polish or compound with a dual-action polisher.
✅ Skip this step if the paint is already flawless — like in the example car from the FST video.
🧴 Step 4: Surface Prep with Chrysoberyl Prep
Before applying the coating, use Chrysoberyl Prep to:
Eliminate any oils, waxes, or polishing residue.
Ensure the coating bonds cleanly to the clear coat.
Spray onto the panel and wipe with a clean microfiber towel.
🖌️ Step 5: Apply FST Coating
Open your FST kit — either Chrysoberyl Advanced or Chrysoberyl Performance — and grab your applicator pad.
Application Instructions:
Apply a solid bead of coating across the applicator to prime it.
Begin with a small section (e.g., the right front fender).
Use straight, overlapping passes in a crosshatch pattern for even coverage.
Let the coating flash/cure for 1–3 minutes, depending on temperature and humidity.
🧽 Step 6: Level & Buff the Coating
Grab two clean microfiber towels:
Towel 1: Gently level the coating. Use light pressure and full coverage.
Towel 2: Buff the panel in light, circular motions to remove any residue or high spots.
Repeat these steps panel by panel across the entire vehicle. For larger sections like the hood or roof, work in halves for better control.
⏱️ Curing Time & Aftercare
Once you’ve completed the coating:
Let it cure for 1 hour before any contact with moisture.
Use Cleanser Pro or Recharge to maintain the vehicle, Cleanser Pro is to be used if water potting or etching in the coating has happened, Recharge is to add a fresh infusion of graphene into the chrysoberyl coating
💬 Need Support?
Have questions about FST Coatings or application methods?
📧 Email us: support@fstcoatingsusa.com
🧰 Final Thoughts
With the fastest curing formula on the market, FST Coatings helps you turn around jobs quicker — without compromising on quality or durability. Follow these steps, and your clients will enjoy stunning gloss, slickness, and long-term protection.
